G-10 GlossaryRedialling-manualWhen you use the regular dialling method, you can quickly call the lastnumber dialled by pressing the REDIAL/PAUSE button.Reduction modeThe MultiPASS L60’s automatic feature that slightly reduces thereceived image to allow room at the top of the page for the sender’s IDinformation. You can also reduce the size of large incoming documentsusing the AUTO RX REDUCE option.RegisteringA process by which you place fax or telephone numbers and names inthe MultiPASS L60’s memory for automatic dialling so that you cansave time dialling frequently called destinations.Regular diallingPressing the individual numeric buttons to dial a fax or telephonenumber.Remote receiving IDThe two-digit code that enables you to manually activate fax receptionusing a telephone that is connected to the MultiPASS L60.Remote receptionActivating fax reception by answering a telephone that is connected tothe MultiPASS L60, but that is not located near the MultiPASS L60. Youneed to dial a remote receiving ID number to start remote reception.ReportA document printed by the MultiPASS L60 and containing informationabout the faxes it has sent or received.ResolutionThe density of dots for any given output device. Expressed in terms ofdots per inch (dpi). Low resolution causes font characters and graphicsto have a jagged appearance. Higher resolution means smoother curvesand angles as well as a better match to traditional typeface designs.Resolution values are represented by horizontal data and vertical data,for example, 360 × 360 dpi. This unit produces output with 600 × 600dpi precision.
