3-2 Registering Information in the MultiPASS L60 Chapter 3Methods for Registering Information in theMultiPASS L60To customise the MultiPASS L60 to your particular needs, you canadjust general operation, sending, receiving, and speed dialling settings.There are two methods of adjusting these settings:Method 1: Using the MultiPASS L60 operation panelYou can adjust settings directly via the operation panel of the MultiPASSL60. Detailed instructions are described in this user’s guide. Adjustingsettings through the operation panel is convenient when you do nothave your MultiPASS L60 connected to a PC.Method 2: Using the MultiPASS Desktop ManagerYou can adjust settings using the MultiPASS Desktop Manager softwareincluded with your MultiPASS L60. For detailed instructions refer to theMultiPASS Desktop Manager User’s Guide.Before adjusting any settings, decide whether you prefer to makechanges from the operation panel or from the MultiPASS DesktopManager. Using both—the operation panel and the MultiPASS DesktopManager—may cause confusion. Changes made to settings through theoperation panel will not be displayed in the MultiPASS DesktopManager, and changes made in the MultiPASS Desktop Manager willoverride any corresponding settings made through the operation panel.N If your MultiPASS L60 unit is connected to a PC, we recommend the useof the MultiPASS Desktop Manager to adjust any settings.
