Chapter 13 The Menu System 13-9TheMenu SystemECM TXMID PAUSE SETAUTO REDIALREDIAL TIMESREDIAL INTERVALTX ERRORRESENDRESEND TXFROMERASE FAILED TXAUTO START TXEnable/disable error correction during transmission.Set the length of the pause you insert into a diallingsequence.Set whether the MultiPASS L60 redials if it fails to get aresponse on the first attempt.Set the number of retries.Set the period of time between rediallings.Set whether the fax redials if an error occurs while sending.Set which pages to resend if TX ERROR RESEND is on.Set whether the fax in memory is erased if an error occursduring sending but then it is resent successfully.ON: Scanning starts 10 seconds after the last number isentered when sending to multiple destinations (5 seconds ifonly sending to one destination.)OFF: After entering the last number, press the START/-COPY button, or else the MultiPASS L60 will return tostandby mode after 60 seconds.ON/OFF2 seconds (1 to 15)*ON/OFF2 times (1 to 15)**2 minutes (2 to 99)***ON/OFFERROR & 1ST PG/ERROR PAGE/ALL PAGESON/OFF****ON/OFFTX SETTINGSName Description Settings(Default settings are shown in bold type)* UK and Hong Kong: 4 seconds (04–11)** UK and Hong Kong: 01–03, Australia: 01–02, Ireland: 01–04, New Zealand: 01–05*** Australia, Hong Kong, Malaysia: 01–99, New Zealand: 1 minute (01–99)**** The default setting for Australia, New Zealand, Hong Kong, Malaysia, Ireland, and Singapore is OFF.
