Chapter 11 Frequently Asked Questions 11-39Frequently AskedQuestionsMEMORY FULLPLEASE WAITMEMORY USED nn%NO ANSWERNO RX PAPERNO TEL #NOT AVAILABLEPLEASE WAITREC’D IN MEMORY——#005#012#022———The MultiPASS L60 issending a fax and itsmemory is full.Shows how much of theMultiPASS L60’s memoryis in use.The receiving fax machinedoes not answer.The other party’s faxmachine is out of paperand its memory is full.The one-touch or codedspeed dialling number hasnot been registered.In manual sending via thehandset, you tried to use aone-touch speed diallingbutton or a coded speeddialling code that has agroup registered in it.The MultiPASS L60 iswarming up.The paper or toner ranout, or a paper jamoccurred, so theMultiPASS L60 receivedthe document in memory.Wait until the fax is sent.The MultiPASS L60continues to send the faxas memory becomesavailable.If you need more memory,print or send anydocuments stored inmemory.Make sure you dialled thecorrect number. Try againlater.Contact the other partyand have them add paperto their fax machine.Register the number. SeeChapter 5.In manual sending via thehandset, you cannot senda document to multipledestinations. Send thedocument to onedestination at a time.Wait until the time andreceiving mode appear inthe LCD display, thenbegin.Add paper to the multi-purpose tray, change thetoner cartridge, or clearthe paper jam, as needed.When the problem issolved, the MultiPASS L60automatically prints thedocument stored inmemory.Message Error Code Cause Action
