6-20 Sending Faxes Chapter 6Memory SendingMemory sending is a quick and easy way to send a fax. The MultiPASSL60 scans the document into its memory as it dials the fax number. If theline is free, the MultiPASS L60 begins sending the fax as it scans the restof the document.The MultiPASS L60 has enough memory to store up to 90 pages (fewerif the document contains many graphics or particularly dense text).Follow the instructions below to send a document with memorysending:N Be sure to adjust the document feed lever before loading yourdocument. See page 6-6 for details.1. Prepare the document and load it, face down, into the AutomaticDocument Feeder (ADF).❏ Once the document is loaded, the LCD display shows thefollowing:Currently used memory:Current resolution:Standby to scan:❏ If necessary, you can adjust the resolution and contrast. Seepage 6-13 for details.❏ You may not be able to use memory sending if the percentageshown in the MEMORY USED display is close to 100%. In thiscase, use manual sending via the handset to send yourdocument.2. Dial the other party’s fax number.Ex:❏ Use one of the dialling methods described on page 6-17.❏ If you must first dial a digit to get an outside line (“9”, forexample), add a pause after that digit by pressing theREDIAL/PAUSE button, as shown in the example above.TEL=9P5164886700DOCUMENT READYSTANDARDMEMORY USED 0%
