48 Setting Up the Machine and the Computer (Macintosh)ENGLISH7 Confirm that the setup program detects access points automatically.z When your access point is detected automaticallyThe access point is detected automatically if no operation is required for connecting to theaccess point. Go to step 8 to proceed with the setup.z If the Access Points dialog box is displayed(1) Select the target access point on the AccessPoints dialog box.If the target access point is not displayed in thelist, see “The target access point is notdetected” on page 63.(2) Confirm the Encryption column of the selected access point.If the Encryption column is blank, click Connect.If WEP, WPA, or WPA2 is displayed in the Encryption column, the access point isconfigured to use the encryption. Enter the Network Password (WEP key or Passphrase)set to the access point and click Connect. For details, see “About Network Key(Windows)/Network Password (Macintosh)” on page 64.z If “An access point could not be detected” is displayedClick OK to display the Access Points dialog box. For details, see “The target access point isnot detected” on page 63.ImportantIf you connect to a network that is not protected with security measures, there is a risk of disclosingdata such as your personal information to a third party.Notez The machine may detect other access points usedin the vicinity.z If an access point supports both WPA and WPA2, itmay be displayed as two different access points onthe list. In this case, choose the one displayingWPA or WPA2 in the Encryption columndepending on which encryption type you intend touse.
