69TroubleshootingENGLISHThe Set Printer IP Address dialog boxis displayed during setupThe following dialog box is displayed if no printer was detected on the network.Specify the IP address of the machine and click Connect to retry the detectionof the target printer.(1)Get IP address automaticallySelect to use an IP address provided by a DHCP server. This requires thatthe DHCP function is enabled on the router or access point.(2)Use next IP addressSelect to manually specify an IP address, for example if there is no DHCPserver functionality in the network environment in which you are using themachine.IP Address/Subnet Mask/Default GatewayEnter each value to specify a fixed IP address when Use next IP Address isselected.(3)Network InformationClick to display the Network Information dialog box, and confirm networksettings when your access point or your machine cannot be detectedautomatically during setup for use over the network. This button is enabledwhen an access point was not detected or could not be connected.(4)ConnectClick to search for the machine with the specified settings. If the machine isstill not be detected with a specified IP address, see “Cannot connect to themachine (the machine is not detected)” on page 66.NoteClicking Back displays the Access Points dialog box.Problem Possible Cause and Measures(1)(2)(3)(4)
