68 TroubleshootingENGLISHThe Access Points dialog box isdisplayed during setup(Continued)ConfigurationClick to display the detailed settings dialog box. The network password (WEP)or the network key (WPA or WPA2) selected in Encryption Method can beconfirmed and changed.ConnectClick to connect to the specified access point.Network (SSID)Enter the Network (SSID) set to the access point. The Network (SSID) is casesensitive. When using AirPort, enter the Network (SSID) in alphanumericcharacters.SSID is also called ESS-ID. For details, refer to your access point’s instructionmanuals or contact its manufacturer.Encryption MethodDo Not UseSelect to disable encryptionUse Password (WEP)Select when transmission is encrypted using the password (WEP key) youspecified.Use WPASelect when transmission is encrypted using the passphrase (WPA key) youspecified.The actual encryption key is renewed automatically at a certain time interval,making the transmission harder to break.Use WPA2Select when transmission is encrypted using the passphrase (WPA2 key)you specified.The actual encryption key is renewed automatically at a certain time interval,making the transmission harder to break.NoteIf a password (WEP key)/passphrase (WPA or WPA2 key) has not been set, adetailed settings dialog box is displayed. To change the settings, clickConfiguration on the Manual Setup dialog box. For details, see “AboutNetwork Key (Windows)/Network Password (Macintosh)” on page 64.ConfigurationClick to display the detailed settings dialog box. The password (WEP key) or thepassphrase (WPA or WPA2 key) selected in Encryption Method can beconfirmed and changed.ConnectClick to connect to the specified access point.“An access point could not be detected”is displayed during setupThis message is displayed when no access point is detected. Clicking OKdisplays the Access Points dialog box. For details, see “The target accesspoint is not detected” on page 63.“Printer could not be connected to thespecified access point” is displayedduring setupThis message is displayed when the machine could not connect to the targetaccess point. Clicking OK displays the Access Points dialog box. For details,see “The target access point is not detected” on page 63.“Another access point with the sameSSID exists” is displayed during setupCancel the current setup and change the SSID of the access point, then startthe setup again.Problem Possible Cause and Measures
