Recording1063 Special Recording ModesFrame Recording ModeSet the number of frames in advance. We recommend using the wirelesscontroller or stabilizing the camcorder, for example, on a tripod. Sound isnot recorded in this mode. This mode is not available if [J OtherFunctions] [Bit Rate/Resolution] is set to [35 Mbps 1440x1080].Configuring Frame Recording Mode1 Open the [Rec Frames] submenu.[J Other Functions] [Frame Rec] [Rec Frames]2 Select the desired number of frames and then press SET.• Available options are 1, 3, 6 and 9 (2, 6 and 12 if [J Other Functions][Frame Rate] is set to [24P] or [60P]).Activating Frame Recording Mode and Recording1 Open the [Special Rec] submenu.[J Other Functions] [Special Rec]2 Select [Frame Rec] and then press SET.• [FRM STBY] appears at the top of the screen (with [FRM] flashing).3 Press the START/STOP button to begin recording.• The camcorder automatically records the set number of frames.• The tally lamps illuminate.• [FRM STBY] changes to [N FRM REC] while recording frames and[N FRM STBY] when frames are not being recorded.• Repeat until you finish recording.4 Open the [Special Rec] submenu.[J Other Functions] [Special Rec]5 Select [Off] and then press SET.• Frame recording mode ends and all of the recorded frames are joinedtogether into one clip.• The tally lamps go out and [STBY] appears at the top of the screen.NOTES• You can use only one special recording mode at a time.• While recording, you cannot change the number of frames.• Some frames at the point the recording was stopped may be recordedand added to the end of the clip.• Frame recording mode will be deactivated if the special recording modeis changed or turned off. It will be deactivated also if you change the[J Other Functions] [Bit Rate/Resolution] or [Frame Rate] setting.[J Other Functions][Frame Rec][Rec Frames][1][J Other Functions][ Special Rec][Off]COPYDownloaded From VideoCamera-Manual.com Manuals
