Recording823 Onscreen Markers and Zebra Patterns4 Select [Enable], select [On] and then press SET to enable theonscreen markers.• All of the selected onscreen markers will be displayed.• Select [Off] to turn off all onscreen markers.OptionsNOTES• If you set an assignable button to [Markers] (0 113), you can pressthe button to activate or deactivate the onscreen markers.Displaying Zebra PatternsThis camcorder has a zebra pattern feature that shows black and whitediagonal stripes over areas that are overexposed. This is displayed onlyon the screen and will not affect your recordings. There are two types ofzebra patterns and you can display both simultaneously. Zebra 1 lets youidentify areas within a certain range (±5 of a specified level) while zebra 2lets you identify areas that are over a specified level. When you displayboth simultaneously and they overlap, only zebra 1 will be displayed inthose areas.1 Open the zebra pattern [Select] submenu.[M LCD/VF Setup] [Select] (under [Zebra])2 Select [Zebra 1], [Zebra 2] or [Zebra 1&2] and then press SET.3 Open the zebra level submenu.[M LCD/VF Setup] [Zebra 1 Level] or [Zebra 2 Level][Center]: Displays a small marker that indicates the center of thescreen.[Horizontal]: Displays a horizontal line to help you compose level shots.[Grid]: Displays a grid that allows you to frame your shotscorrectly (horizontally and vertically).[Safety Zone]: Displays indicators that show various safe areas, such asthe action safe area and text safe area. Available optionsfor [Safety Zone Area] are [95%], [92.5%], [90%] and[80%].[Aspect Marker]: Displays markers that indicate various aspect ratios to helpyou keep your shot within that area. Available options for[Aspect Ratio] are [2.35:1], [1.85:1], [1.75:1], [1.66:1],[14:9], [13:9] and [4:3].[M LCD/VF Setup][Select](under [Zebra])[ Zebra 1]COPYDownloaded From VideoCamera-Manual.com Manuals
