55Recording 3Adjusting the Focus3 Turn the focus ring to adjust the focus.• When you focus at full telephoto, the image will be in focusthroughout the entire zoom range.NOTES• Using the subject distance display on the screen:- When the camcorder switches out of autofocus mode or when youadjust the focus with the focus ring, the approximate subjectdistance is displayed on the screen for approximately 3 seconds.- Use the subject distance display as an estimate; when the distancereading is not considered very precise for a particular zoom range, itwill be displayed in gray.- [f] indicates infinity focus and [f–] indicates over infinity focus.- You can change the units of distance between meters and feet usingthe [J Other Functions] [Custom Function] [Obj. Dist. Unit]setting (0 126).- The correct subject distance will not be displayed when the optionalWA-H82 Wide Attachment is attached.Manual Focus ModeTurn the focus ring to manually adjust the focus. The faster you turn thefocus ring, the more quickly you can focus on your subject.1 Move the FOCUS switch to M.• [MF] appears on the bottom left of the screen.COPYDownloaded From VideoCamera-Manual.com Manuals
