91Recording 3Recording AudioRecording AudioThe camcorder features two-channel linear PCM audio recording andplayback with a sampling frequency of 48 kHz. You can record audiousing the built-in microphone, optional external microphone (XLRterminal) or line input (XLR terminal). You can select the audio inputindependently for channel 1 and channel 2.Using the Built-in MicrophoneAfter you activate the built-in microphone, you can configure the low-cutfilter and sensitivity, and activate the attenuator.Set the AUDIO IN switch of the desired channel to INT.Configuring the Low-Cut Filter1 Open the [Int. Mic Low Cut] submenu.[m Audio Setup] [Audio Input] [Int. Mic Low Cut]2 Select the desired option and then press SET.OptionsOperating modes:[m Audio Setup][Audio Input][Int. Mic Low Cut][Off][Off]: For recording audio under usual conditions.[LC1]: For recording mainly people’s voices.[LC2]: For reducing the background sound of wind when recordingoutdoors in windy surroundings (for example, on a beach or close tobuildings). Note that when you use this setting some low-frequencysounds may be suppressed along with the sound of wind.COPYDownloaded From VideoCamera-Manual.com Manuals
