167Photos 7Photo OperationsCopying a File from the Index Screen1 Open the [Photos] Index Screen.• Refer to Viewing Photos (0 163).2 Move the orange selection frame to the photo with the custom picturefile to be copied.3 Press SET to open the photo menu.4 Select [Copy X File] and then press SET.• The [X Data 1/3] screen appears with the orange selection frameindicating the first file slot in the camcorder.• Alternatively, you can press the CUSTOM PICT. button.• You can push the joystick up/down or turn the SELECT dial todisplay the [X Data 2/3] and [X Data 3/3] screens.5 Select the desired file slot in the camcorder and then press SET.6 Select [OK] and then press SET.• The custom picture file embedded in the selected photo is copied,overwriting the file in that slot.7 When the confirmation message appears, press SET.NOTES• You cannot copy a custom picture file to a slot that is protected.Photo NumberingPhotos are automatically assigned consecutive numbers from 0101 to9900, and stored on the SD card in folders containing up to 100 photos.Folders are numbered from 101 to 998. You can select the photonumbering method to be used.The photo number indicates the name and location of the file on the SDcard. For example, a photo numbered 101-0107 is located in the“DCIM\101CANON” folder as the file “IMG_0107.jpg”.1 Open the [Photo Numbering] submenu.[J Other Functions] [Photo Numbering]2 Select the desired option and the press SET.Options[J Other Functions][Photo Numbering][Continu.]Operating modes:[Reset]: Photo numbers will restart from 101-0101 every time you inserta new SD card. If an SD card already contains photos, photonumbers will continue from the number following that of the lastphoto on the SD card.[Continu.]: Photo numbers will continue from the number following that ofthe last photo recorded with the camcorder.COPYDownloaded From VideoCamera-Manual.com Manuals
