Recording723 Using the ND FilterUsing the ND FilterUsing the ND filters allows you keep the aperture within an appropriaterange when recording in bright surroundings*.* When recording in bright surroundings, the camcorder closes down the aperture.This may cause the picture to appear blurred depending on the zoom position.Using the ND filter or setting a faster shutter speed can reduce such blur.Set the ND FILTER switch to the desired setting.• The filter setting appears on the left side of the screen.ND Filter SettingsNOTES• During automatic aperture control (0 69), the ND filter warning willappear if the current setting is not appropriate. Perform the actiondescribed in the following table.• Depending on the scene, the color may change when turning the NDfilter on/off. Setting a custom white balance (0 75) may be effective insuch case.Operating modes:Switch setting Screen displayOFF No display1 [ND1 1/4]2 [ND2 1/16]3 [ND3 1/64]Warning What to do[ND CLR] (flashes) Set the ND FILTER switch to OFF.[ND1 1/4] (flashes) Set the ND FILTER switch to 1.[ND2 1/16] (flashes) Set the ND FILTER switch to 2.[ND3 1/64] (flashes) Set the ND FILTER switch to 3.One of the aboveindications appears inredThe ND FILTER switch is between two positions. Set it correctly tothe desired position.COPYDownloaded From VideoCamera-Manual.com Manuals
