149External Connections 6Connecting to an External MonitorNOTES• If necessary, you can superimpose the onscreen displays on the videodisplayed on the external monitor (0 149).Using the AV or VIDEO 2 TerminalWhen you output video from the AV terminal or VIDEO 2 terminal, thevideo signal is converted to an analog SD composite video signal. Whilethe VIDEO 2 terminal outputs only video, the AV terminal also outputsaudio. You can select the SD output method (0 146).NOTES• If necessary, you can superimpose the onscreen displays on the videodisplayed on the external monitor (0 149).• When you play back a clip on a monitor with a 4:3 aspect ratio, themonitor will switch automatically to widescreen mode if it is compatiblewith the Video ID-1 system.Superimposing Onscreen Displays to Appear on anExternal MonitorYou can choose to superimpose onscreen displays on the video outputfrom the HD/SD SDI terminal (b only), HDMI OUT terminal, HD/SDCOMPONENT OUT terminal, AV terminal or VIDEO 2 terminal. Doing sowill display the onscreen displays on an external monitor. You must setthis function separately for HD and SD output. This setting will not affectyour recordings.1 Open the [HD Onscreen Disp.] or [SD Onscreen Disp.] submenu.[N Video Setup] [HD Onscreen Disp.] or [SD Onscreen Disp.]2 Select [On] and then press SET.• G appears on the right side of the screen (when [M LCD/VFSetup] [Custom Display] [Output Display] is set to [On]).NOTES• Onscreen displays will not appear on an external monitor for SD outputif [N Video Setup] [SD Output] is set to [Side Crop].[N Video Setup][HD Onscreen Disp.][SD Onscreen Disp.][Off]COPYDownloaded From VideoCamera-Manual.com Manuals
