59Recording 3Adjusting the FocusOptionsPush AFDuring manual focus mode or Normal AF mode, press the PUSHAF button and hold it pressed down.• The autofocus (Instant AF mode) is activated as long as you hold thePUSH AF button pressed down. You can also use the PUSH AF buttonon the optional ZR-2000 Zoom Remote Controller.NOTES• When recording in bright surroundings, the camcorder closes down theaperture. This may cause the picture to appear blurred and is morenoticeable toward the wide-angle end of the zoom range. Turn thebuilt-in ND filter on/off according to the screen display (0 72).• When you attach the optional WA-H82 Wide Attachment to thecamcorder, Instant AF and PUSH AF are not available.• Autofocus takes longer to focus when the frame rate is set to [30P] or[24P] than when it is set to [60i].• When recording under dark conditions, the focusing range narrows andthe picture may appear blurred.• Autofocus may not work well on the following subjects or in thefollowing cases. In such case, focus manually.- Reflective surfaces- Subjects with low contrast or without vertical lines- Fast moving subjects- Through dirty or wet windows- Night scenes[Instant]: Sets the autofocus mode to Instant AF. The focus is adjusted atthe highest speed. This mode is useful even when recording invery bright or low-light surroundings. This mode uses both theTTL system and external sensor for focusing.[Normal]: Sets the autofocus mode to Normal AF. The autofocusadjustment is made at a stable speed.COPYDownloaded From VideoCamera-Manual.com Manuals
