55-16 Setting up Network Servers• Print a Configuration page (see page 3-47).Use the information on this page to determine the current ColorPASS settings.• Load the TCP/IP network protocol (for Windows 95/98/Me/2000 only, also load Clientfor Microsoft Networks) on the computer.• Verify the Workgroup name of the computer in the Windows Network control panel.Make sure the Workgroup name is the same as the one listed in ColorPASS Setup.• For Windows 95/98/Me/2000 only, in the Windows Network control panel, configurethe computer to allow file sharing, and then restart the computer.• Ping the ColorPASS (see page 5-20) to verify TCP/IP communication is successful.Configuring the ColorPASS and clients forFiery WebToolsThe Fiery WebTools provide access to many ColorPASS functions via the Internet (orintranet), providing additional flexibility in remote management. You can access theFiery WebTools from a Windows computer.T O SET UP F IERY W EB T OOLS ON THE C OLOR PASS:1. In ColorPASS Network Setup, enable TCP/IP.2. Set a valid, unique IP Address for the ColorPASS, and then set the subnet mask. Set agateway address if necessary.3. Enable Web Services.4. In ColorPASS Printer Setup, confirm the Print Queue is published.
