33-33 Network Setup optionsUse Automatic ConfigurationYes/No [Yes]This option appears if you chose DHCP or BOOTP as the protocol for automaticallyobtaining the IP address of the ColorPASS (see page 3-18).Choose Yes to have the ColorPASS use a WINS name server and automatically obtainits IP address. After making your choice, you proceed to the Server Name option.Choose No to proceed to the Use WINS Name Server option, where you specifywhether to use a WINS name server, and then to the WINS IP Address option, whereyou specify its IP address.Use WINS Name ServerYes/No [No]Broadcasts from SMB devices cannot pass across a router without a WINS nameserver. Setting up the WINS name server is outside the scope of this manual. To findout if a name server is available, contact your network administrator.WINS IP Address[127.0.0.1]This option appears only if you choose Yes for WINS Name Server. Change the defaultaddress to the correct IP address for the WINS Name Server. Obtain the correctaddress from your network administrator.Server NameDefault NameThe server name is the name that will appear on the network for accessing theColorPASS via SMB. The default name is the same as the server name assigned inServer Setup (see page 3-7).Server CommentsServer comments (optional) can contain information about the printer. Thesecomments are listed in the Properties of the ColorPASS in Network Neighborhood.Comments can be up to 15 characters long.
