33-13 Network Setup optionsEnable Source RoutingYes/No [No]Select Yes if your network supports source routing.Source RoutingRequest All RoutesYes/No [Yes]This option appears only if you enabled Source Routing. Select Yes if you want theRequest packet to travel to its destination by all routes.Source RoutingRespond All RoutesYes/No [Yes]This option appears only if you answered No to the previous option. Select Yes if youwant the Response packet to return by all routes to the originating computer.Protocol Setup optionsAppleTalk ZoneList of zonesThe ColorPASS searches the network for AppleTalk zones in your network segment.Scroll through the list to select the AppleTalk zone in which you want the ColorPASSto appear. If your segment has only one zone, the ColorPASS is assigned to that zoneautomatically.To configure the ColorPASS, choose each protocol and enter the settings for thatprotocol. You can enable AppleTalk, TCP/IP, and IPX/SPX communicationsimultaneously.Network SetupProtocol Setup AppleTalk SetupEnable AppleTalkYes/No [Yes]Select Yes if you have an AppleTalk network connected to the ColorPASS. This settingenables the ColorPASS to communicate over AppleTalk networks.Exit Protocol SetupAppleTalk SetupTCP/IP SetupIPX/SPX SetupProtocol Setup
