33-44 Performing Setup from the Control PanelChange PasswordChange Password enables you to set or change the Administrator password for theColorPASS. Anyone with the Administrator password can modify the Setup options,and control the flow and order of print jobs with the job management tools.When the ColorPASS is installed, there is no password. If you do not create anAdministrator password, users are not required to enter a password to modify theSetup or use the administrator functions in the job management tools. If anAdministrator password has been set previously, you are required to enter it when yourun Setup. Use the up and down buttons to select the characters and the left and rightarrow buttons to move between them (see “Types of Setup screens” on page 3-5).For more information on Administrator access privileges, see page 2-3.For information on controlling print jobs with the job management tools, see theJob Management Guide.N OTE : The Operator password can be set and changed from the CommandWorkStation only.T O CHANGE THE C OLOR PASS PASSWORD :New PasswordUse the up and down buttons to select the characters and the left and right arrowbuttons to move between them. Enter characters from left to right, since the left arrowline selection button is a delete key. The password can be any combination of lettersand numbers up to 19 characters. Choose OK when you are done. Be sure to keeptrack of the password.1. Scroll the main Setup menu and choose Change Password.2. Enter and confirm the password as described below.PS SetupColor SetupJob Log SetupChange PasswordSetup
