44-8 Setting up the ColorPASS from a Windows ComputerNetwork SetupNetwork Setup configures the ColorPASS to receive print jobs over the networks thatare used at your site. If the ColorPASS is configured to enable more than one protocol,it automatically switches to the correct protocol when it receives a print job. When twonetwork ports are enabled, print jobs can be received over all ports at the same time.You can view and specify the following network settings in Network Setup:• Adapters and ports—view currently configured network adapters and port settings• Protocols—including AppleTalk, IPX/SPX, and TCP/IP• Print Services—including LPD printing (TCP/IP), NetWare printing (PServer),Windows print sharing (SMB), HTTP support (WWW), and Port 9100 printingAdapters/PortsFrom local Setup only, the installed network boards are displayed. You cannot changethis information. From remote Setup, you can enable Ethernet or Token Ring. Theseoptions are described in the next section.
