66-10 Administering the ColorPASSRuntime error messagesFor error messages related to canceling jobs and printing, including the Disk Fullmessage and alerts to load media, see the Job Management Guide. These messages arereported by the job management tools.Users can turn on PostScript error reporting as a print option from Mac OSapplications.Check power and cableThis message indicates that the interface cable between the ColorPASS and the copieris not connected, or a print job is ready but the copier is not turned on.Printer not foundMost failures to find a printer on the network are due to conflicting or missing name oraddress settings for the ColorPASS. You must enter names in specific places. Therequired names are:• TCP/IP host name (also known as the DNS name), which is defined by yourorganization.Enter the host name as the Server Name in ColorPASS Setup.• Remote printer (internal machine) name. Use one of the following:printholdYou must reconfigure one of the Fiery utilities on each workstation if you change theDNS name (also known as the TCP/IP host name) of the ColorPASS.
