33-8 Performing Setup from the Control PanelSystem DateEnter the correct system date in the standard form for your usage. The date is used onthe Job Log.System TimeEnter the correct system time. Enter the time based on the 24-hour clock in the formHH:MM (Hours:Minutes). The time is used on the Job Log.Print Start PageYes/No [No]Specify whether the ColorPASS should print a start page every time it is restarted. Thestart page displays information about the ColorPASS, including the server name,current date and time, amount of memory installed in the ColorPASS, last calibrationdate, network protocols enabled, and connections published.Use Character SetMacintosh/DOS/Windows [Macintosh]Specify whether the Control Panel and the Command WorkStation should use theMacintosh, DOS, or Windows character set for displaying filenames. This is importantif filenames include accented or composite characters (such as é or æ).For mixed-platform networks, choose the option that gives the best overallrepresentation of the special characters you use.Enable Printing GroupsYes/No [Yes]Specify whether to enable printer groups for Member Printing. If you enable thisoption, you must use the Command WorkStation to define user groups andpasswords. Users must then enter their group name and password when they print.Enable Printed QueueYes/No [Yes]Specify whether to enable the Printed queue, which creates a storage location on theColorPASS disk for recent jobs that were printed from the Print queue. Users withAdministrator or Operator access to the job management tools can reprint jobs fromthe Printed queue without sending them to the ColorPASS again. If you select No,jobs are deleted from the ColorPASS disk immediately after they are printed.
