Danfoss VLT AutomationDrive FC 360 Programming Manual

Also see for VLT AutomationDrive FC 360: Quick guide Quick guide Quick guide Programming guide Programming guide

Contents

Danfoss VLT AutomationDrive FC 360 Programming Manual Manual pdf 97 page image

4.14 Parameters: 15-** Drive Information4.14.1 15-0* Operating Data15-00 Operating hoursRange: Function:0 h* [0 - 0x7fffffff. h] View how many hours the frequencyconverter has run. The value is saved,when the frequency converter is turnedoff.15-01 Running HoursRange: Function:0 h* [0 -0x7fffffff. h]View how many hours the frequencyconverter has run. Reset the counter inparameter 15-07 Reset Running HoursCounter. The value is saved, when thefrequency converter is turned off.15-02 kWh CounterRange: Function:0 kWh* [0 -2147483647kWh]Registering the power consumption ofthe motor as a mean value over onehour. Reset the counter inparameter 15-06 Reset kWh Counter.15-03 Power Up'sRange: Function:0* [0 - 2147483647 ] View the number of times the frequencyconverter has been powered up.15-04 Over Temp'sRange: Function:0* [0 - 65535 ] View the number of frequency convertertemperature faults which have occurred.15-05 Over Volt'sRange: Function:0* [0 - 65535 ] View the number of frequency converterovervoltages which have occurred.15-06 Reset kWh CounterOption: Function:[0] * Do not reset No reset of the kWh counter is desired.[1] Reset counter Press [OK] to reset the kWh counter to zero(see parameter 15-02 kWh Counter).NOTICEThe reset is carried out by pressing [OK].15-07 Reset Running Hours CounterOption: Function:[0] * Do not reset[1] Reset counter Press [OK] to reset the running hourscounter to zero (seeparameter 15-01 Running Hours.4.14.2 15-3* Alarm LogParameters in this group are array parameters, where up to10 fault logs can be viewed. [0] is the most recent loggeddata, and [9] the oldest. Error codes, values, and timestamp can be viewed for all logged data.15-30 Alarm Log: Error CodeRange: Function:0* [0 - 255 ] View the error code and look up its meaning inchapter 6 Troubleshooting.15-31 InternalFaultReasonRange: Function:0* [-32767 -32767 ]View an extra description of the error. Thisparameter is mostly used in combinationwith Alarm 38 Internal Fault.4.14.3 15-4* Drive IdentificationParameters containing read-only information about thehardware and software configuration of the frequencyconverter.15-40 FC TypeRange: Function:0* [0 - 0 ] View the frequency converter type. The readout isidentical to the power field of the typecodedefinition, characters 1-6.15-41 Power SectionRange: Function:0* [0 - 20 ] View the FC type. The readout is identical to thepower field of the typecode definition, characters7-10.15-42 VoltageRange: Function:0* [0 - 20 ] View the FC type. The readout is identical to thepower field type of the typecode definition,characters 11-12.15-43 Software VersionRange: Function:0* [0 - 5 ] View the combined SW version (or ‘packageversion’) consisting of power SW and control SW.Parameter Descriptions Programming GuideMG06C402 Danfoss A/S © Rev. 2014-03-31 All rights reserved. 954 4