3 - 54Chapter 3 Removal and Replacement Procedures (RRPs)Version 3 2007.03.15Removal 30 TOP COVER (PL1.1.1)Steps 1 through 5 are for reference. Before removing this component, check that Steps 1 through 5have been performed.1) Open the FRONT COVER (PL1.2.1).2) Remove the FUSER. (Removal 8)3) Remove the REAR COVER. (Removal 12)4) Remove the RIGHT COVER. (Removal 13)5) Remove the LEFT COVER. (Removal 22)6) Remove the four screws (silver, tap, 10mm) and the one screw (silver, with flange, 10mm) thatfix the TOP COVER (PL1.1.1) to the printer.7) Disengage the two holes of the TOP COVER from the left and right bosses of the printer.8) Lift up the TOP COVER to disengage the front and left bosses of the TOP COVER from theholes of the printer. Remove it.Go to the next removal step:Removal 31 FAN (PL9.1.10) or Removal 35 INTERLOCK SWITCH (PL9.1.3)Kmy03043KC6)6)6)6)6)7)7)8)-18)-2
