3 - 108Chapter 3 Removal and Replacement Procedures (RRPs)Version 3 2007.03.15Replacement 22 LEFT ARM ASSEMBLY(PL7.1.97)1) Replace the HOLDER DAMPER to the printer together with the DAMPER OIL.2) Replace the SPRING SUPPORT to the printer3) Replace the LINK L by mating the backside groove on the LINK L with the boss on the printerand pulling the DAMPER OIL slightly upward.When performing the step described below, pay attention to the orientation of the LEVERRELEASE. Ensure that the longer hollow boss of the LEVER RELEASE faces theHOLDER DAMPER.4) Replace the LEVER RELEASE to the HOLDER DAMPER.Continues to the next page.Kmy03095KBNOTE3)-13)-22)1)4)
