3 - 136Chapter 3 Removal and Replacement Procedures (RRPs)Version 3 2007.03.15Replacement 35 OPERATOR PANEL (PL1.2.97)1) Route the HARNESS ASSY OPEPANE through the notch on the lib of the FRONT COVERand the hook.When performing the step below, route the HARNESS ASSY OPEPANE so that itcrosses the HARNESS ASSY FRONT COVER.2) Replace the COVER HARNESS by mating the hole of the COVER HARNESS with the boss onthe FRONT COVER.When performing the step below, check that the HARNESS ASSY OPEPANE is routedover.3) Secure the COVER HARNESS to the FRONT COVER using the four screws (silver, tap,8mm).Continues to the next page.HARNESS ASSY OPEPANENOTEHARNESS ASSYFRONT COVERHARNESS ASSY OPEPANECOVER HARNESSBRACKET PIVOTHARNESS ASSYFRONT COVERKmy03125KD1)2)3)3)3)3)
