• VHDNOTE: Hyper-V Export supports VHDX disk formats if the target machine is running Windows 8(Windows Server 2012) or higher. If the VHDX is not supported for your environment, the optionis disabled. On the Network Adapters page, select the virtual adapter to be connected to aswitch.11. On the Volumes page, select the volume(s) to export. For the virtual machine to be an effectivebackup of the protected machine include the protected machine’s boot drive. Example, C:\.Your selected volumes should be no larger than 2040 GB for VHD. If the selected volumes are largerthan 2040 GB, and the VHD format is selected, you will receive an error.12. On the Summary page, click Finish to complete the wizard and to start the export.NOTE: You can monitor the status and progress of the export by viewing the Virtual Standby orEvents tabExporting Microsoft Windows data using Oracle VirtualBox exportIn AppAssure, you can choose to export data using a Oracle VirtualBox export by performing a one-timeexport, or by establishing a continuous export (for virtual standby).Complete the steps in the following procedures for the appropriate type of export.NOTE: To perform this type of export, you should have Oracle VirtualBox installed on the Coremachine. VirtualBox Version 4.2.18 or higher is supported for Windows hosts.Performing a one-time Oracle VirtualBox exportComplete the steps in this procedure to perform a one-time export to Oracle VirtualBox.To perform a one-time Oracle VirtualBox export1. In the AppAssure Core Console, do one of the following:• From the button bar, click Export to launch the Export Wizard, and do the following:1. On the Select Export Type page, select One-time export, and then click Next.2. On the Protected Machines page, select the protected machine you want to export to avirtual machine, and then click Next.• Navigate to the machine you want to export, and then in the Summary tab, from the Actionsdrop-down menu for that machine, select Export > One-time.The Export Wizard appears on the Recovery Points page.2. On the Recovery Points page, select the recovery point from the AppAssure Core that you want toexport, and then click Next.3. On the Destination page in the Export Wizard, in the Recover to Virtual machine drop-down menu,select VirtualBox, and then click Next.4. On the Virtual Machine Options page, select Use Windows machine.5. Enter the parameters for accessing the virtual machine as described in the following table.Option DescriptionVirtual MachineNameEnter a name for the virtual machine being created.NOTE: The default name is the name of the source machine.123
