Text Box DescriptionPassword The password used to connect to this machine.4. Click Connect to connect to this machine.NOTE: If the Agent software is not yet installed on the machine that you designated, follow theprocedure Deploying The Agent Software When Protecting An Agent. Restart the agentmachine after deploying the Agent software, and then resume with the next step.5. In the Protect dialog box, edit the settings as needed as described in the following table.Field DescriptionDisplay Name The host name or IP address you specified in the Connect dialog box appearsin this text field. Optionally, enter a new name for the machine to be displayedin the Core Console.NOTE: You can also change the display name later by accessing theConfiguration tab for an existing machine.Repository Select the repository on the Core in which to store the data from this machine.Encryption Key Specify whether encryption is applied to the data for every volume on thismachine to be stored in the repository.NOTE: The encryption settings for a repository are defined under theConfiguration tab in the Core Console.Initially PauseProtectionAfter you add a machine for protection, AppAssure automatically begins takinga base snapshot of data. You can select this check box to pause protectioninitially. You then must force a snapshot manually when you are ready to startprotecting your data. For more information about manually forcing a snapshot,see Forcing A Snapshot.Volume Groups Under Volume Groups, you can define which volumes that you want toprotect and establish a protection schedule.To set a default protection schedule of every 60 minutes for all volumes on themachine, click Apply Default.You can also select any volume on the machine and define protectionparameters for it individually.Initial settings apply a default protection schedule of every 60 minutes. Tomodify the schedule for any volume, click Edit for that volume. You can thenfurther define the interval between snapshots (including defining a separateschedule for weekends) or specify a daily time to begin a snapshot.For more information on editing the protection schedule for a selectedvolume, see Creating Custom Schedules For Volumes.6. Click Protect.93
