a. Choose a destination folder for the LMU by clicking the Change button.NOTE: The default destination folder is C:\Program Files\AppRecovery\LocalMountUtility.b. Select whether or not to Allow Local Mount Utility to automatically send diagnostic and usageinformation to AppAssure Software, Inc.c. Click Next to continue to the Progress page and download the application. The applicationdownloads to the destination folder, with progress displayed in the progress bar. When finished,the wizard automatically advances to the Completed page.12. Click Finish to close the wizard.Adding a core to the local mount utilityTo mount a recovery point, you must add the Core to the LMU. There is no limit as to how many coresyou can add.To add a core to the Local Mount Utility:1. From the machine on which the LMU is installed, launch LMU by double-clicking the desktop icon.2. If the User Account Control window displays, click Yes to let the program to make changes to themachine.3. In the upper-left corner of the AppAssure Local Mount Utility window, click Add core.4. In the Add Core window, enter the requested credentials described as follows:Text Box DescriptionHost name The name of the Core from which you want to mount recovery points.NOTE: If installing the LMU on a core, LMU automatically adds thelocalhost machine.Port The port number used to communicate with the Core.The default port number is 8006.Use my Windowsuser credentialsSelect this option if the credentials you use to access the Core are the same asyour Windows credentials.Use specificcredentialsSelect this option if the credentials you use to access the Core are differentfrom your Windows credentials.User name The user name used to access the Core machine.NOTE: This option is only available if you choose to use specificcredentials.Password The password used to access the Core machine.NOTE: This option is only available if you choose to use specificcredentials.5. Click Connect.6. If adding multiple cores, repeat Step 3 through Step 5 as necessary.64
