• Set replication priority for an agent. For more information on prioritizing the replication of agents, seeSetting Replication Priority For An Agent .• Monitor replication as needed. For more information on monitoring replication, see MonitoringReplication.• Manage replication settings as needed. For more information on managing replication settings, seeManaging Replication Settings• Recover replicated data in the event of disaster or data loss. For more information on recoveringreplicated data, see Recovering Replicated DataReplicating to a self-managed coreA self-managed core is a core to which you have access, often because it is managed by your companyat an off-site location. Replication can be completed entirely on the source core, unless you choose toseed your data. Seeding requires that you consume the seed drive on the target core after you configurereplication on the source core.NOTE: This configuration applies to replication to an off-site location and to mutual replication. TheCore must be installed on all source and target machines. If you are configuring your system formulti-point to point replication, you must perform this task on all source cores and the one targetcore.Configuring the source core to replicate to a self-managed target coreTo configure the source core to replicate to a self-managed target core:1. In the Core, click the Replication tab.2. Click Add Target Core.The Replication wizard appears.3. Select I have my own Target Core, and then enter the information as described in the followingtable.Text Box DescriptionHost Name Enter the host name or IP address of the Core machine to which you arereplicating.Port Enter the port number on which the AppAssure Core communicates with themachine. The default port number is 8006.User Name Enter the user name for accessing the machine. For example, Administrator.Password Enter the password for accessing the machine.If the Core you want to add has been paired with this source core previously, perform the following:a. Select Use an existing target core.b. Select the target core from the drop-down list.c. Click Next.d. Skip to step 7.4. Click Next.5. On the Details page, enter a name for this replication configuration; for example, SourceCore1. Ifyou are re-initiating or repairing a previous replication configuration, select My Core has beenmigrated and I would like to repair replication6. Click Next.7. On the Agents page, select the agents you want to replicate, and then use the drop-down lists in theRepository column to select a repository for each agent.47
