Text Box DescriptionAutomatic rebootafter installSelect to specify whether the Core starts upon the completion of thedeployment and installation of the AppAssure Agent Installer.4. Click Verify to validate the credentials you entered.The Deploy Agent dialog box displays a message indicating that validation is being performed.5. Click Abort if you want to cancel the verification process.After the verification process completes, a message indicating that verification has been completedappears.6. Click Deploy.A message indicating that the deployment has started appears. You can view the progress in theEvents tab.7. Click Show details to view more information about the status of the agent deployment.8. Click OK.Replicating a new agentWhen you add an AppAssure Agent for protection on a source core, AppAssure gives you the option toreplicate the new agent to an existing target core.To replicate a new agent:1. Navigate to the Core Console, and then click the Machines tab.2. In the Actions drop-down menu, click Protect Machine.3. In the Protect Machine dialog box, enter the information as described in the following table.Text Box DescriptionHost Enter the host name or IP address of the machine that you want to protect.Port Enter the port number the AppAssure Core uses to communicate with theagent on the machine.Username Enter the username used to connect to this machine. For example,Administrator.Password Enter the password used to connect to this machine.4. Click Connect to connect to this machine.5. Click Show Advanced Options, and edit the following settings as needed.Text Box DescriptionDisplay Name Enter a name for the machine to be displayed in the Core Console.Repository Select the repository on the AppAssure Core where the data from this machineis stored.Encryption Key Specify whether encryption is applied to the data for every volume on thismachine stored in the repository.NOTE: The encryption settings for a repository are defined under theConfiguration tab in the Core Console.97