6. Select from the following options:• Live Recovery. When selected, the rollback for Windows volumes happens immediately. Selectedby default.NOTE: The Live Recovery option is not available for Linux volumes.• Force Dismount. When selected, it forces the dismount of any mounted recovery point prior toperforming the rollback. Selected by default.7. Click Rollback.The system begins the process of rolling back to the selected recovery point.Performing a rollback for a Linux machine by using the command lineA rollback is the process of restoring the volumes on a machine from recovery points. In AppAssure , youcan perform a rollback for volumes on your protected Linux machines using the command-line aamountutility.CAUTION: Do not attempt to perform a rollback on the system or root (/) volume.NOTE: Rollback functionality is supported for your protected Windows machines within the CoreConsole. For more information, see Performing A Rollback.To perform a rollback for a volume on a Linux machine:1. Run the AppAssure aamount utility as root, for example:sudo aamount2. At the AppAssure mount prompt, enter the following command to list the protected machines:lm3. When prompted, enter the IP address or host name of your AppAssure Core server.4. Enter the logon credentials, that is, the username and password, for this server.A list displays showing the machines that this AppAssure server protects. It lists the agent machinesfound by line item number, host/IP address, and an ID number for the machine (for example:293cc667-44b4-48ab-91d8-44bc74252a4f).5. To list the currently mounted recovery points for the specified machine, enter the followingcommand:lr NOTE: You can also enter the machine ID number in this command instead of the line itemnumber.A list is displayed that shows the base and incremental recovery points for that machine. This listincludes a line item number, date/timestamp, location of volume, size of recovery point, and an IDnumber for the volume that includes a sequence number at the end (forexample, ”293cc667-44b4-48ab-91d8-44bc74252a4f:2”), which identifies the recovery point.6. To select a recovery point for rollback, enter the following command:r [volume_recovery_point_ID_number] [path]This command rolls back the volume image specified by the ID from the Core to the specified path.The path for the rollback is the path for the device file descriptor and is not the directory to which itis mounted.130
