To modify the transfer queue settings:1. Navigate to the Core Console.2. Click Configuration → Settings.3. In the Transfer Queue pane, click Change.The Transfer Queue dialog box appears.4. In the Maximum Concurrent Transfers text box, enter a value to update the number of concurrenttransfers.Set a number from 1 to 60. The smaller the number, the lesser the load is on network and othersystem resources. As the capacity that is processed increases, so does the load on the system.5. In the Maximum Retries text box, enter a value to update the maximum number of retries.6. Click OK.Adjusting the client time-out settingsTo adjust the client time-out settings:1. Navigate to the Core Console.2. Click Configuration → Settings.3. In the Client Timeout Settings Configuration area, click Change.The Client Timeout Settings dialog box appears.4. In the Connection Timeout text box, enter the number of minutes and seconds before a connectiontime-out occurs.5. In the Connection UI Timeout text box, enter the number of minutes and seconds before aconnection UI time out occurs.6. In the Read/Write Timeout text box, enter the number of minutes and seconds that you want tolapse before a time-out occurs during a read/write event.7. In the Read/Write UI Timeout text box, enter the number of minutes and seconds that will to lapsebefore a read/write UI time out occurs.8. Click OK.Configuring deduplication cache settingsTo configure deduplication cache settings:1. Navigate to the Core Console.2. Click Configuration → Settings3. In the Deduplication Cache Configuration area, click Change.The Deduplication Cache Configuration dialog box appears.4. In the Primary Cache Location text box, enter an updated value to change the primary cachelocation.5. In the Secondary Cache Location text box, enter an updated value to change the secondary cachelocation.6. In the Metadata Cache Location text box, enter an updated value to change the metadata cachelocation.7. In the Dedupe Cache Size text box, enter a value corresponding to the amount of space you want toallocate for the deduplication cache.From the unit size drop-down field, select either GB (gigabytes) or TB (terabytes), to specify the unitof measurement for the value in the Dedupe Cache Size text box.27
