PowerEdge FC430 system overview 11Drive-Status indicator pattern ConditionNOTE:Thedrivestatusindicatorremainsoffuntilalldrivesareinitializedaftersystempowerissupplied. Drivesarenotreadyforinsertion or removal during this time.Flashes green, amber, and then turns off Predicted drive failureFlashes amber four times per second Drive failedFlashes green slowly Drive rebuildingSteady green Drive onlineFlashes greenfor three seconds, amber for threeseconds, andturnsoffaftersixsecondsRebuild abortediDRAC Direct LED indicator codesThe iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.Figure 5. iDRAC Direct LED indicator1 iDRAC Direct status indicatorTheiDRACDirectLEDindicatortabledescribes iDRACDirectactivitywhenconfiguringiDRAC Directbyusingthemanagementport(USBXML Import).Table 5. iDRAC Direct LED indicatorsConvention iDRAC Direct LEDindicator patternConditionA Green Turns green for a minimum of two seconds to indicate the start and end of a file transfer.B Flashing green Indicates file transfer or any operation tasks.C Green and turns off Indicates that the file transfer is complete.D Not lit Indicates that the USB is ready to be removed or that a task is complete.
