Dell PowerEdgeFC430 Owner's Manual

Contents

Pre-operating system managementapplications 35Option DescriptionSystem MemorySizeSystem MemoryTypeSystem MemorySpeedSystem MemoryVoltageSpecifies the memory size in the system.Specifies the type of memory installed in the system.Specifies the system memory speed.Specifies the system memory voltage.Video Memory Specifies the amount of video memory.System MemoryTestingMemory OperatingModeNode InterleavingSpecifies whether the system memory tests are run during system boot. Options are Enabled and Disabled. Thisoption is set to Disabledbydefault.Specifies the memory operating mode. The options available are Optimizer Mode, Advanced ECC Mode, MirrorMode, Spare Mode, Spare with Advanced ECC Mode, Dell Fault Resilient Mode and Dell NUMA Fault ResilientMode.This option is set to Optimizer Modebydefault.NOTE: The Memory Operating Modeoptioncanhavedifferentdefaultandavailableoptions basedonthememoryconfigurationofyour system.NOTE: The Dell Fault Resilient Mode option establishes an area of memory that is fault resilient. Thismodecan beused by anoperating system that supportsthe feature toload critical applications orenables the operating system kernel to maximize system availability.Specifies if Non-Uniform Memory architecture (NUMA) is supported. If this field is set to Enabled, memoryinterleaving is supported if asymmetric memory configuration is installed. If the field is set to Disabled, the systemsupports NUMA(asymmetric) memoryconfigurations.Thisoptionissetto Disabledbydefault.Snoop Mode Specifies the Snoop Mode options. The Snoop Mode options available are Home Snoop, Early Snoop, and Clusteron Die. This option is set to Early Snoop bydefault. This field is available only whenthe Node Interleaving is setto Disabled.Related linksMemory SettingsViewing Memory SettingsProcessor SettingsYou can use the Processor Settingsscreen to viewthe processor settings, and perform specific functionssuch asenablingvirtualizationtechnology, hardware prefetcher, and logical processor idling.Related linksProcessor Settings detailsSystem BIOSViewing Processor SettingsViewing Processor SettingsTo view the Processor Settings screen, perform the following steps:1 Turn on, or restart your system.2 Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restartyoursystemandtryagain.3 Onthe System Setup Main Menu screen, click System BIOS.