Pre-operating system managementapplications 433 Onthe System Setup Main Menu screen, click System BIOS.4 On the System BIOS screen, click Miscellaneous Settings.Related linksMiscellaneous SettingsMiscellaneous Settings detailsMiscellaneous Settings detailsThe Miscellaneous Settings screen details are explained as follows:Option DescriptionSystem Time Enables you to set the time on the system.System Date Enables you to set the date on the system.Asset Tag Specifies the asset tag and enables you to modifyit for securityand tracking purposes.Keyboard NumLock Enables you to set whether the system boots withthe NumLock enabled or disabled. This option is set to Onbydefault.NOTE: This option does not apply to 84-key keyboards.F1/F2 Prompt onErrorLoad Legacy VideoOption ROMIn-SystemCharacterizationEnables or disables the F1/F2 prompt on error. This option is setto Enabledby default. The F1/F2 prompt alsoincludes keyboard errors.Enables you to determine whether the system BIOS loads thelegacy video (INT 10H) option ROM from the videocontroller. Selecting Enabled in the operating system does notsupport UEFI video output standards. This field isavailable onlyfor UEFI boot mode. Youcannot set the option to Enabledif UEFISecure Boot mode is enabled.Enables or disables In-System Characterization. This option is set to Disabled by default. The two other optionsare Enabled and Enabled - No Reboot.NOTE: The default setting for In-System Characterization is subject to change in future BIOS releases.When enabled, In-System Characterization (ISC) executes during POST upon detecting relevant change(s) insystem configuration to optimize system power and performance. ISC takes about 20 seconds to execute, andsystem reset is needed for ISC results to be applied. The Enabled-No Reboot option executesISCandcontinueswithout applying ISC results until the next time system reset occurs. The Enabled option executes ISC and forcesan immediate system reset so that ISC results can be applied. It takes the system longer to be ready due to theforced system reset. When disabled, ISC does not execute.Related linksMiscellaneous SettingsViewing Miscellaneous SettingsiDRAC Settings utilityTheiDRACsettingsutilityisaninterfacetoset upandconfigure theiDRACparametersbyusing UEFI. Youcanenableor disable variousiDRAC parameters by using the iDRAC settings utility.NOTE: Accessing some of the features on the iDRAC settings utility needs the iDRAC Enterprise License upgrade.For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.Related linksDevice SettingsSystem BIOSEnteringtheiDRACSettingsutilityChanging the thermal settings