Installing and removing sled components 87If you need to service an SSD, turn off the sled and before removing the SSD wait for 30 seconds after the Power-on indicator on the sledturns off. Otherwise, the SSD maynot be recognized after it is reinstalled and the sled is turned on again.Removing anSSDfrom anSSDcarrierPrerequisitesCAUTION: Manyrepairsmay onlybedonebyacertifiedservicetechnician. You shouldonlyperformtroubleshooting andsimplerepairsasauthorizedinyourproductdocumentation, orasdirectedbytheonlineortelephoneserviceandsupportteam.Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1 Followthesafetyguidelineslistedinthe Safetyinstructions section.2 Remove the SSD carrier out of the sled.StepsPull the rails on the side of the carrier and lift the SSD out of the carrier.Figure 32. Removing an SSD in an SSD carrier1 SSDcarrier 2 SSDNext steps1 InstallanSSDintheSSDcarrier.2 Install the SSD carrier into the sled.Related linksSafety instructionsBefore working inside your systemRemoving an SSD carrierInstalling an SSD into an SSD carrierAfter working inside your system
