28 Pre-operating system managementapplicationsRelated linksUEFI iSCSI SettingsNetwork Settings screen detailsUEFI iSCSI Settings detailsSystem BIOSViewing Network SettingsViewing UEFI iSCSI SettingsViewing Network SettingsTo view the Network Settings screen, perform the following steps:1 Turn on, or restart your system.2 Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restartyoursystemandtryagain.3 Onthe System Setup Main Menu screen, click System BIOS.4 Onthe SystemBIOS screen, click NetworkSettings.Related linksNetwork SettingsNetwork Settings screen detailsNetwork Settings screen detailsThe Network Settings screen details are explained as follows:Option DescriptionPXE Device n (n = 1to 4)PXE Device nSettings(n= 1to4)Related linksNetwork SettingsEnablesordisablesthedevice.Whenenabled,aUEFIbootoptioniscreatedforthedevice.Enables you to control the configuration of the PXE device.Viewing Network SettingsUEFI iSCSI SettingsYoucanusethe iSCSISettings screentomodifyiSCSIdevicesettings.TheiSCSISettingsoptionis available onlyintheUEFI bootmode.BIOS does not control network settings in the BIOS boot mode. For the BIOS boot mode, the option ROM of the network controllerhandles the network settings.Related linksUEFI iSCSI Settings detailsViewing UEFI iSCSI Settings