Installing and removing sled components 73Figure 22. Replacing the SD vFlash card1 SD vFlashslot 2 SD vFlashcardNext stepsFollow the procedure listed in the After working inside your system section.Related linksSafety instructionsBefore working inside your systemAfter working inside your systemInstalling the SD vFlash cardInstalling the SD vFlash cardPrerequisitesCAUTION: Manyrepairsmay onlybedonebyacertifiedservicetechnician. You shouldonlyperformtroubleshooting andsimplerepairsasauthorizedinyourproductdocumentation, orasdirectedbytheonlineortelephoneserviceandsupportteam.Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthatareshippedwithyourproduct.1 Followthesafetyguidelineslistedinthe Safetyinstructions section.2 FollowtheprocedurelistedintheBefore workinginside yoursystemsection.NOTE: To use an SD card with your system, ensure that the Internal SD Card Port is enabled in System Setup.Steps1 Locate the SD card connector onthe internal dual SD module. Align the SD card appropriately and insert the contact-pin end of thecard into the slot.NOTE: The slot is keyed to ensure correct insertion of the card.2 Press the card into the card slot to lock it into place.
