14ENGLISHConnecting Other SourcesENGLISHCable indicationsSignal directionThe hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).When connecting other equipment, disconnect the power supply cord from the AC power outlet before connecting other equipment.Video cableAudio cableNOTE:• Do not plug in the power supply cord until all connections have been completed.• When making connections, also refer to the operating instructions of the other components.• Be sure to connect the left and right channels properly (left with left, right with right).• Note that binding pin-plug cables together with power supply cords or placing them near a power transformer will result ingenerating hum or other noise.Analog terminal (Stereo)ARLRL(Orange)Pin-plug cableDigital terminal (Coaxial)BCoaxial cable (75 Ω/ohms pin-plug cable)Digital terminal (Optical)COptical cable (Optical fiber cable)Video terminalDVideo cable (75 Ω/ohms video pin-plug cable)S-Video terminalES Video cable(Yellow)Audio signalVideo signal(White)(Red)Component video terminalFComponent video cable(Y)(PB/CB)(PR/CR)(Green)(Blue)(Red)IN OUT OUT ININ OUT OUT INConnecting Other SourcesAdvanced setup optionsDuring playback, press the 22 button.2 To stop the playback2 To turn off the main unitPress the ON/STANDBY switch.Press the MUTE button.• Cancelling MUTING mode:q Press the MUTE button again.w Press the VOLUME button on the remote control unit, oradjust the volume up or down via the front panel VOLUMEcontrol knob.Use this to turn off the audio output temporarily.2 To mute the soundSCART terminalG21-pin SCART cable