Denon S-101 Operating Instructions Manual

Also see for S-101: Operating instructions Brochure & specs Service manual Operating instructions Service manual

62ENGLISHENGLISHTroubleshootingPageMeasuresCauseSymptomDisplay not lit andsound not producedwhen power switch setto on.• Power supply cord not plugged insecurely.• Check the insertion of the powersupply cord plug.12Display lit but sound notproduced.• Speaker cables not securelyconnected.• Improper position of theFUNCTION button.• Volume control set to minimum.• MUTING is on.• Digital signals not input Digitalinput selected.• Connect securely.• Set to a suitable position.• Turn volume up to suitable level.• Switch off MUTING.• Input digital signals or select inputterminal to which digital signalsare being input.Monitor does notdisplay an image.• Connections between the videooutput terminal of this unit and theinput connector of the monitor areincomplete.• The input setting of the monitorTV is different.• When “PROGRESSIVE” is set, novideo signals are output from theVIDEO OUT, S-VIDEO OUT orSCART terminals.• Check whether the connectionsare correct.• Set the input switching of the TVto the terminal to which the videoinput is connected.• Set “INTERLACED” if you want touse the VIDEO OUT, S-VIDEOOUT or SCART signals.The program cannot becopied from DVD to theVCR.• Almost all movie softwarecontains a copy prevention signal.• A copy cannot be made.Common problems when listening to the discs, tapes and FM broadcasts, etc.TroubleshootingIf a problem should arise,first check the following.1. Are all the connections correct ?2. Are you following the instructions in the manual ?3. Are the speakers and other components operating property?If this unit does not seem to be functioning properly, check the table below. If this does not solvethe problem, this unit may be damaged. Turn off the power, unplug the power supply cord fromthe power outlet, and contact your store of purchase or nearest DENON sales office.1029131415, 3011, 15,16—15—PageCheckSymptom—56——DVD operationPlayback does not startwhen 1 button ispressed.Playback stopsimmediately.• Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.)• Discs other than DVDs, video CDs and music CDs cannot be played.• Disc is dirty. Wipe off the dirt.Menu playback of videoCD’s is not possible.• Menu playback is not possible with anything but video CDs withplayback control.Picture is disturbedduring the searchoperation.• Some disturbance is normal.Buttons do not operate. • Some operations are disabled for some discs.No subtitles aredisplayed.• Subtitles are not displayed for DVDs not containing subtitles.• Subtitles are turned off. Turn the subtitles setting on.Audio (or subtitle)language does notswitch.• The audio (or subtitle) language does not switch for discs which do notinclude multiple audio (or subtitle) languages.• For some discs the audio (or subtitle) language cannot be switchedwhen the operation to switch it is performed, but can be switched onthe menu screens.Angle does not switch.• The angle cannot be switched for DVDs which do not contain multipleangles. In some cases multiple angles are only recorded for specificscenes.Playback does not startwhen the title isselected.• Check the “RATINGS” setting.The password for ratinglevel has beenforgotten.Reset all the DVDsetting to FactoryPreset.• Initialize using the procedure described at “Initialization of themicroprocessor”.The disc is not playedwith the audio orsubtitle language set asthe default setting.• The disc does not play with the selected audio or subtitle language ifthat audio or subtitle language is not included on that DVD.Picture is not displayedin 4:3 (or 16:9).• Set the WIDE/LB/PS switch on the rear panel for the type of TV beingused.Menu screen messagesfor the desired languagedo not display.• Check the default setting for the disc language’s menu language.——43—18—5041431143When the subwooferindicator has lit.• The subwoofer and main unit arenot properly connected with thesystem cable.• Check whether or not the cable isproperly connected.If the indicator lights even thoughthe cable is properly connected,there may be a malfunction.10