Denon S-101 Operating Instructions Manual

Also see for S-101: Operating instructions Brochure & specs Service manual Operating instructions Service manual

18ENGLISHBasic Operation Basic OperationENGLISH2 Switching the audio language(Multiple audio function)1 During playback, Press the AUDIO/PTY button.• The current audio language number is displayed.Press the CURSOR • or ª button to select thedesired language.• The display turns off when the AUDIO/PTY button ispressed.2With DVDs containing multiple audio language signals, the audiolanguage can be switched during playback.• With some discs it is not possible to change the audio languageduring playback. In such cases, select from the “SETUP”menu.• The language selected in the default settings ( page 43) isset when the power is turned on and when the disc is replaced.2 Switching the subtitle language(Multiple subtitle function)1 During playback, Press the SUBTITLE/RTbutton.• The current subtitle language number is displayed.Press the CURSOR • or ª button to select thedesired language.• The display turns off when the SUBTITLE/RT button ispressed.2With DVDs containing multiple subtitle language signals, thesubtitle language can be switched during playback.2 Switching the angle(Multiple angle function)1 During playback, Press the ANGLE/CT button.• The current angle number is displayed.Press the CURSOR • or ª button to select thedesired angle.• The display turns off when the ANGLE/CT button ispressed.2With DVDs containing multiple angle signals, the angle can beswitched during playback.Stopping playbackDuring playback, press the 22 button.• Playback stops and wall paper is displayed.2 Resume play memory function (DVD only)• With the S-101, when the 22 button is pressed, that position isstored in the memory. At this time, “1” flashes on the display.When the 1 button is pressed after pressing the 22 button,playback resumes from the position at which it was stopped.The resume play memory function is canceled if the disc tray isopened or the 22 button is pressed a second time.• The resume play memory function only works for discs forwhich the elapsed time is shown on the display duringplayback.2 Auto power off function• The S-101 is equipped with a function that automaticallyswitches the power to standby if no operation is performed for30 minutes while in the stop mode with the function set toDVD.• This function is set to off upon shipment from the factory. If youwish to turn it on, set the “AUTO POWER MODE ” ( page51) setting to “ON”.Playing still pictures (Pausing)During playback, press the 33 button.• Press the 1 button to resume normal playback.