115(3) Press the SETUP button on the rear of the Bluetooth® adapter for at least 0.5 second to switch it to Setup mode.The interface/power supply LED flashes orange, indicating that the Bluetooth® adapter has switched to Setupmode.(4) Wait for the Fount New Hardware wizard (Windows XP/Windows 2000)* to automatically start on the computer.Following the wizard's on-screen instructions, install the USB-COM port driver.* New Hardware Found wizard (Windows Me) or Add New Hardware Wizard (Windows 98/98SE)For further details on installing the USB-COM port driver, refer to the Bluetooth® Adapter user's manual.(5) Check the port number for the driver just installed with the Windows Device Manager, under Ports.(6) Load the configuration software (BASetting) on the computer. Press the OK button when the following screenappears.(7) When the following screen appears, specify the port number for the USB-COM port driver installed.SETUP buttonBluetooth ® adapter (rear)
