57Item Parameters Defaults Refer to:MOD-16 √Check digit method for Codabar (NW-7) 7-check methodTransmit a/b/c/dTransmit A/B/C/DTransmission of start/stop codesfor Codabar (NW-7)Disable √Section 10.2.1 (5)Code 32Item Parameters Defaults Refer to:EnableConversion from Code 39 to Code 32 format Disable √EnableTransmission of leading "A" in Code 32 data Disable √EnableChecking of a check digit in Code 32 data Disable √Section 10.2.1 (5)Code 39Item Parameters Defaults Refer to:Enable, without C/D √Enable, with C/DScanning Code 39DisableMinimum number of digits readablefor Code 39 1 digitMaximum number of digits readablefor Code 391 to 99 digits(excluding start/stop codes) 99 digits(See Note 2.)Enable √Transmission of a check digit for Code 39 DisableSection 10.2.1 (5)(See Note 3.)EnableTransmission of start/stop codes for Code 39 Disable √EnableConversion to Full ASCII for Code 39 Disable √Section 10.2.1 (5)Code 93Items Parameters Defaults Refer to:EnableScanning Code 93 Disable √Minimum number of digits readablefor Code 93 1 digitMaximum number of digits readablefor Code 931 to 99 digits(excluding start/stop codes and 2-digitC/D) 99 digits(See Note 2.)(Note 2) The setting range differs from the number of digits that the scanner can actually read.(Note 3) To enable the transmission of a check digit, it is also necessary to select the "Enable, with C/D" parameterfor scanning.: Can be changed only with the configuration software.
