51(5) Connect a new battery cartridge to the battery cable connector.Note: Do not peel off the protection film covering a battery cartridge.(6) Insert the new battery cartridge into the scanner so that the battery pull strap is routed below the battery cartridgeas shown below.(7) Route the cables into the space around the battery cartridge to prevent them from getting pinched between thebattery cover and the case, and then close the battery cover and secure it with the screw.Note: After loading a new battery cartridge, be sure to charge it for at least two hours.Battery cartridgeChargecableconnectorBattery cartridgeBattery pull strapBattery pull strapBattery cableconnectorBattery cartridgeChargecableconnectorBattery cableconnectorBattery cableconnectorBattery pull strapBatterypull strap
