124 Changing Bluetooth® adapter's interface to PS/2 keyboard interfaceThe default interface of the Bluetooth® adapter is USB keyboard interface. Change the interface to PS/2 keyboardusing the following procedure.(1) Download the configuration software (BASetting) from our website (QBdirect) and install it on the computer.(2) Connect the Bluetooth® adapter to the computer using the USB or RS-232C interface cable provided, and thenstart the configuration software (BASetting).For the configuration software setup procedure, refer to the instructions given in Quick Setup for the use ofUSB-COM or RS-232C interface.(3) Select Keyboard as interface and then specify the keyboard type and others. An incorrect setting garbles somecharacters.(4) On the file menu, choose Apply new settings to switch the Bluetooth® adapter's interface to the PS/2 keyboardinterface, and the keyboard type to the specified type.(5) Replace the current interface cable of the Bluetooth® adapter with a PS/2 keyboard interface cable, then connectthe other end of the cable to the keyboard port on the computer.Note: When no external keyboard is used, e.g., on a notebook PC, select "Without external keyboard" for thekeyboard connection type using the configuration software (BASetting). In this case, there is no problemleaving the keyboard connector (female) of the PS/2 keyboard interface cable disconnected.PS/2 keyboardinterface cableComputer connector (male)Keyboard connector(female)Bluetooth ® adapter
