122(3) Specify the connection configuration.Click the downward facing arrow to the right of the label "Connection configuration," select the port numberconnected to the Bluetooth® adapter, and press the OK button.(4) Specify COM port.Specify the COM port parameters that match the Bluetooth® adapter's ones, then press the OK button.This completes HyperTerminal setup.(5) Read a bar code with the scanner. Setup is complete if the data displays normally.* As an alternative to HyperTerminal, the Denso keyboard interface (QR_kbif) software allows the display of datafrom the scanner on the computer screen for any program accepting keyboard input. It is available as a freedownload from our website "QBdirect" at http://www.qbdirect.net. Before downloading, you are requested toregister as a member (free of charge).
