Denso GT10B-SB User Manual

Contents

10 Switching to sleep mode for power savingAfter completion of scanning, the scanner switches from standby to sleep mode to save power. The scanner in sleepmode takes more time to start and complete a sequence of scanning operation than the one on standby. Select thetransition period from standby to sleep mode to meet your scanning intervals, using the configuration software(ScannerSetting).Transition period from standby to sleep modeafter completion of scanning:DescriptionImmediately (default) After completion of scanning, the scanner immediately switchesto sleep mode.This setting is useful for operations with longer scanningintervals, e.g., 5 minutes or more.5 seconds15 seconds30 seconds1 minute5 minutesAfter completion of scanning, the scanner waits for the specifiedperiod and then switches to sleep mode.This setting is useful for intermittent scanning. Select a transitionperiod suitable for your scanning intervals.Disable The scanner does not switch to sleep mode after completion ofscanning.This setting is useful for operations with shorter scanningintervals, 5 seconds or less or when the scanning speed shouldhave priority over the power saving.Note: Selecting a longer transition period or disabling switching to sleep mode shortens the operation time of thebattery cartridge. Scanning with Bluetooth® wireless link brokenThe scanner can read bar codes even with the Bluetooth ® wireless link being broken. Use this scanning way whenscanning bar codes is required but data transfer is not, for instance, when the scanner itself checks the verificationresult (with the scan lock enabled as described in Section 7.1) without transferring it to the host computer.Scanning with Bluetooth ® wireless link broken and that with Bluetooth® wireless link established can be switchedonly with the bar-coded parameter menu.Scan w/ Bluetooth® link broken Allows the scanner to scan bar codes with the Bluetooth ® wirelesslink being broken. This bar code also disables the Bluetooth ®interface, making data transfer with the host computer impossible.Cancel "Scan w/ Bluetooth® link broken" Cancels the "Scan w/ Bluetooth ® link broken" setting.This bar code allows the scanner to scan bar codes with theBluetooth ® wireless link being established. It also enables theBluetooth ® interface, making data transfer with the host computerpossible.Note: The "Scan w/ Bluetooth ® link broken" parameter retains its setting even the scanner reads the "Endoperation" and "Start operation" bar codes in this order with the "Scan w/ Bluetooth ® link broken" being selected.To cancel the setting, you need to scan the "Cancel "Scan w/ Bluetooth® link broken"" bar code.