60(4) Beeper, indicator LED and vibratorItems Parameters Defaults Refer to:Enable √Beeper Disable Section 9.1Short (60 ms) √Medium (80 ms)Beeping time of a short beepLong (120 ms)Section 9.1High √MediumBeeper volumeLowSection 9.1Low (2.0 kHz)Medium (4.0 kHz) √Beeper frequencyHigh (4.3 kHz)Section 9.1Before data transmission √Trigger timing for the reading completionbeeper and indicator LED After data transmissionEnable √Beeper when reading RSS-14 Stacked andRSS-14 Stacked Omnidirectional DisableOne-shot beep √Beeping pattern when reading RSS-14Stacked and RSS-14 StackedOmnidirectional Intermittent beepSection 9.1Enable √Indicator LED Disable Section 9.2"OK" vibrations √"NG" vibrationsVibratorDisableSection 9.3The beeper and indicator LED parameters above apply to reading confirmation. They do not affect the functions of thebeeper and indicator LED used for confirmation of wireless link's connection/disconnection and verification result.: Can be changed only with the configuration software.
